Energy Efficient Small Cell Planning For High Capacity Wireless Networks

This thesis presents a new strategy to densify Small Cells (i.e., add more low powered base stations within macro networks) and enhance the coverage and capacity of Heterogeneous Networks. This is accomplished by designing Micro Cell for outdoor applications, Pico and Femtocell for indoor applications. It is shown that, there exists a free space propagation medium in all propagation environments due to Fresnel zones, and the path loss slope within this zone is similar to free space propagation medium. This forms the basis of our development of the present work. The salient feature of the proposed work has two main considerations (a) The cell radius of Small Cells must be within the first Fresnel zone break point, and (b) The minimum inter-cell distance must be greater than twice of Small Cell radius. The proposed network is simulated in real a radio network simulator called ATOLL. The simulation results showed that densify Small Cells not only enhanced the capacity and coverage of Heterogeneous Networks but also improved the carrier to interference ratio significantly. Since the proposed work allows UE (user equipment) to have Line of Sight (LOS) communication with the serving cell, and UE can have higher uplink (UL) signal to interference plus noise ratio (SINR) that will further allow UE to reduce its transmission power, which will consequently lead to a longer battery life for the UE and reduce the interference in the system

RF Coverage Planning And Analysis With Adaptive Cell Sectorization In Millimeter Wave 5G Networks

The advancement of Fifth Generation Network (5G) technology is well underway, with Mobile Network Operators (MNOs) globally commencing the deployment of 5G networks within the mid-frequency spectrum range (3GHz–6GHz). Nevertheless, the escalating demands for data traffic are compelling MNOs to explore the high-frequency spectrum (24GHz–100GHz), which offers significantly larger bandwidth (400MHz-800 MHz) compared to the mid-frequency spectrum (3GHz–6GHz), which typically provides 50MHz-100MHz of bandwidth. However, it is crucial to note that the higher-frequency spectrum imposes substantial challenges due to exceptionally high free space propagation loss, resulting in 5G cell site coverage being limited to several hundred meters, in contrast to the several kilometers achievable with 4G. Consequently, MNOs are faced with the formidable task of accurately planning and deploying hundreds of new 5G cells to cover the same areas served by a single 4G cell.This dissertation embarks on a comprehensive exploration of Radio Frequency (RF) coverage planning for 5G networks, initially utilizing a conventional three-sector cell architecture. The coverage planning phase reveals potential challenges, including coverage gaps and poor Signal-to-Interference-plus-Noise Ratio (SINR). In response to these issues, the dissertation introduces an innovative cell site architecture that embraces both nine and twelve sector cells, enhancing RF coverage through the adoption of an advanced antenna system designed with subarrays, offering adaptive beamforming and beam steering capabilities. To further enhance energy efficiency, the dissertation introduces adaptive higher-order cell-sectorization (e.g., nine sector cells and twelve sector cells). In this proposed method, all sectors within a twelve-sector cell remain active during peak hours (e.g., daytime) and are reduced to fewer sectors (e.g., nine sectors or six sectors per cell) during off-peak hours (e.g., nighttime). This dynamic adjustment is facilitated by an advanced antenna system utilizing sub-array architecture, which employs adaptive beamforming and beam steering to tailor the beamwidth and radiation angle of each active sector. Simulation results unequivocally demonstrate significant enhancements in RF coverage and SINR with the implementation of higher-order cell-sectorization. Furthermore, the proposed adaptive cell-sectorization method significantly reduces energy consumption during off-peak hours. In addition to addressing RF coverage planning, this dissertation delves into the numerous challenges associated with deploying 5G networks in the higher frequency spectrum (30GHz-300GHz). It encompasses issues such as precise cell site planning, location acquisition, propagation modeling, energy efficiency, backhauling, and more. Furthermore, the dissertation offers valuable insights into future research directions aimed at effectively surmounting these challenges and optimizing the deployment of 5G networks in the high-frequency spectrum

5G Backhaul: Requirements, Challenges, and Emerging Technologies

5G is the next generation cellular networks which is expected to quench the ever-ending thirst of data rates and interconnect billions of smart devices to support not only human centric traffic, but also machine centric traffic. Recent research and standardization work have been addressing requirements and challenges from radio perspective (e.g., new spectrum allocation, network densification, massive multiple-input-multiple-output antenna, carrier aggregation, inter-cell interference mitigation techniques, and coordinated multi-point processing). In addition, a new network bottleneck has emerged: the backhaul network which will allow to interconnect and support billions of devices from the core network. Up to 4G cellular networks, the major challenges to meet the backhaul requirements were capacity, availability, deployment cost, and long-distance reach. However, as 5G network capabilities and services added to 4G cellular networks, the backhaul network would face two additional challenges that include ultralow latency (i.e., 1 ms) requirements and ultradense nature of the network. Due to the dense small cell deployment and heavy traffic cells in 5G, 5G backhaul network will need to support hundreds of gigabits of traffic from the core network and today’s cellular backhaul networks are infeasible to meet these requirements in terms of capacity, availability, latency, energy, and cost efficiency. This book chapter first introduce the mobile backhaul network perspective for 2G, 3G, and 4G networks. Then, outlines the backhaul requirements of 5G networks, and describes the impact on current mobile backhaul networks

Rectangular Microstrip Patch Antenna at 2GHZ on Different Dielectric Constant for Pervasive Wireless Communication

In this Paper presents the result for different dielectric constant values and the result is performed by thickness of 2.88mm and resonance frequency of 2GHz where 2.32 (Duroid) are gives the best result. In the recent years the development in communication systems requires the development of low cost, minimal weight, low profile antennas   that are capable of maintaining high performance over a wide spectrum of frequencies.  This technological trend has focused much effort into the design of a Microstrip patch antenna. The proposed antenna design on different dielectric constant and analyzed result of all dielectric constant between 1 to 10, when the proposed antenna designs on Duroid substrate with dielectric constant 2.32. At 2GHz the verify and tested result on MATLAB are Radiation Efficiency=91.99%, Directivity=5.4dBi, Directive gain=4.98dBi and Half Power Beam Width-H plane=99.6123 degrees.DOI:http://dx.doi.org/10.11591/ijece.v2i3.34

5G Network Coverage Planning and Analysis of the Deployment Challenges

The 5G cellular network is no longer hype. Mobile network operators (MNO) around the world (e.g., Verizon and AT&T in the USA) started deploying 5G networks in mid-frequency bands (i.e., 3–6 GHz) with existing 4G cellular networks. The mid-frequency band can significantly boost the existing network performance additional spectrum (i.e., 50 MHz–100 MHz). However, the high-frequency bands (i.e., 24 GHz–100 GHz) can offer a wider spectrum (i.e., 400~800 MHz), which is needed to meet the ever-growing capacity demands, highest bitrates (~20 Gb/s), and lowest latencies. As we move to the higher frequency bands, the free space propagation loss increases significantly, which will limit the individual cell site radius to 100 m for the high-frequency band compared to several kilometers in 4G. Therefore, the MNOs will need to deploy hundreds of new small cells (e.g., 100 m cell radius) compared to one large cell site (e.g., Macrocell with several km in radius) to ensure 100% network coverage for the same area. It will be a big challenge for the MNOs to accurately plan and acquire these massive numbers of new cell site locations to provide uniform 5G coverage. This paper first describes the 5G coverage planning with a traditional three-sector cell. It then proposes an updated cell architecture with six sectors and an advanced antenna system that provides better 5G coverage. Finally, it describes the potential challenges of 5G network deployment with future research directions

A Walker Designed for Parkinson’s Disease Patients Based on a Survey in Dhaka, Bangladesh

A neurodegenerative disorder like Parkinson’s disease (PD) causes tremor, rigidity, postural instability and gait problems in early stages and thus poses an undetermined threat to the social and personal lives of the elderly in developing countries due to insufficient survey and research activities. However, several types of assistive devices (AD) are available in the market and the real patients’ requirements are often overlooked in their design. This paper presents the process of design and fabrication of an innovative walker for PD patients. This walker has a non-modular foldable design which incentivizes patients to stand up straight and walk without the help of others. A survey on patients battling parkinsonism and practicing doctors was performed in public hospitals in Dhaka, Bangladesh and relevant engineering data was derived from it using Quality Function Deployment (QFD) which can also help visualize further market research opportunities. A finite element analysis (FEA) was performed before the walker was constructed for safety. It was handed to several volunteers for use and their responses were satisfactory. The designed walker may serve as a low-cost AD which is likely to improve a patient’s posture and overall lifestyle and therefore, it can act as a means of rehabilitation